The packet tracer is used to configure a DHCP server. If you are reading this article it means you are currently configuring a DHCP server using the packet tracer.
What’s the big deal about configuring a DHCP server using the packet tracer? It’s not like you can’t do it by hand. You can just type “dhcp” at the command line and it will start looking up the server configuration and look up the server information.
The dhcp server is the main DHCP server for a few websites, and also the default dhcp server for most of them.
If you want to learn how to configure a DHCP server with the packet tracer, take a look at this tutorial. Its pretty much what you need to understand to get started.
If you want to learn how to do a dhcp server, you should go to and type in the hostname. If it doesn’t show up, you can put it there. If you want to do it through the Cisco ios app, you should go into the Cisco ios app and type in the user-id or the username.
I’ve been using packet tracer for quite some time now, and the amount of information I can get from it has been great. Now, if you want to learn how to configure your dhcp server with the packet tracer, I recommend the Cisco ios app. It’s pretty slick and easy to use, so you can set up a lot of different servers. If you want to learn how to do a dhcp server, you should go to and type in the hostname.
Now, for the most part, you should be doing this using the Cisco ios app. I know I am.
You’re using a cisco ios server with the dhcp app. So, if you’d like to learn how to set up a dns server with the Cisco ios app, you should go to and type in the hostname.
The Cisco ios app has a lot of nifty features that make setting up a dns server with it simple. One of them is the ability to use the DHCP protocol. The other is the ability to use cisco ios as a DHCP server. I recommend the latter.
DHCP stands for Dynamic Host Configuration Protocol. Basically, when you use your server with DHCP, you dont have to wait for a DHCP Request to come in, and can get an IP address automatically. DHCP was designed to be used with routers, not servers. The downside, however, is that it is not as easy as it sounds. You have to wait for the server to assign an address when you connect. It may take up to 10 minutes for your server to become fully assigned.